Services / Photovoltaic Commissioning
Service · Solar energy

Commissioning of Photovoltaic Systems

ADT Ingeniería performs the commissioning and start-up of solar photovoltaic systems, ensuring the plant enters operation safely, efficiently and reliably. We verify every component with specialized testing and ground and aerial thermography.

Solar photovoltaic plant

Solar commissioning and start-up

We support the start-up of your solar plant with a complete acceptance-testing protocol, validating panels, strings, wiring and insulation before it enters service, while keeping a record and full traceability of the results.

  • I-V curve testing
  • String testing
  • Solar cable insulation (DC)
  • VLF testing on medium-voltage cables
  • Ground and aerial infrared thermography
  • Technical report and commissioning
Request this service

Photovoltaic System Testing

Specialized diagnostics on panels, strings and wiring to ensure the plant's maximum performance.

I-V curve tracer
Performance

I-V Curve

Measurement of the current-voltage (I-V) curve of panels and strings to verify actual power output, detect losses and compare against the manufacturer's specifications.

Photovoltaic string inspection
Strings

String Testing

Verification of open-circuit voltage (Voc), short-circuit current (Isc), polarity and continuity per string to identify faulty or improperly connected strings.

Megger MIT 1025 for insulation testing
DC Cables

Solar Cable Insulation

Insulation resistance testing on direct-current (DC) solar cables to ensure safety and prevent leakage and ground faults.

VLF HVA 60 equipment
MV Cables

VLF Testing on MV Cables

Very-low-frequency (VLF) tests on the plant's medium-voltage evacuation cables to assess the condition of the insulation without damaging it.

HIKMICRO G61 thermographic camera
Thermography

Ground Thermography

Inspection with a high-resolution infrared camera to detect hot spots, damaged cells, failed bypass diodes and poor connections.

DJI Matrice M4T drone for aerial thermography
Aerial

Aerial Thermography with Drone

Aerial inspection with a drone and thermal camera to cover large solar fields quickly and safely, locating anomalies even in hard-to-reach areas.

Aerial thermography of solar panels
🔍 Predictive diagnostics

Ground and Aerial Infrared Thermography

We detect hot spots and anomalies in electrical and industrial equipment before they cause failures, outages or safety hazards. With high-resolution cameras and specialized drones we inspect panels, transformers, motors, lines, substations and photovoltaic fields, even in hard-to-reach areas.

  • Early detection of hidden faults
  • Fast, safe inspections at height
  • Greater reliability and operational continuity
  • Lower costs from damage and repairs
  • Protection of people and critical assets

Certified reports: our thermography reports, both ground and aerial, are prepared and endorsed by a certified Level II thermographer, ensuring a reliable, standard-compliant diagnosis.

Certified aerial operation Aeronáutica Civil UAS Pilot

Our drones are registered and certified with Colombia's Aeronáutica Civil, and our pilot holds UAS (Unmanned Aircraft Systems) certification from the Aeronáutica Civil. We carry out every aerial inspection in compliance with current aeronautical regulations, with full safety and legal backing.

Our Equipment

Specialized instrumentation for the commissioning of solar plants.

Matrice M4T Drone I-V 500W HVA 60 Megger MIT 1025 HIKMICRO G61

We carry out commissioning following best practices and current regulations. About to energize your solar plant? Contact us.

Ready to energize your solar plant?

We handle the commissioning, testing and start-up of your photovoltaic system.

Request a consultation